A classic has been reborn for uncompromising planetary observers
The rumors are true. Carl Zeiss Jena is making a limited production of these legendary eyepieces exclusively for Baader Planetarium. Sold as a set of four, this collection consists of essential focal lengths with an improved lens design: 16mm, 10mm, 6mm and 4mm. No short cuts were taken with this production. Only the finest, ultra-expensive optical glass has been used throughout. The oculars afford a full 43 degrees apparent field of view that is free of distortion. Two additional internal stray light baffles yield ultra high contrast. Ultimate Zeiss high-efficiency multi-coatings provide perfect color correction and sharpness to the edge. Image brightness with these eyepieces is unsurpassed.
Roland Christen of Astro-Physics offers these comments after evaluating
a pre-production set of the Zeiss Abbe II eyepieces:
The Zeiss Abbe II eyepiece design features four tiny razor sharp triangular cutouts (field marks) spaced at 90 degree intervals in the field stop of the eyepiece. These triangles act as a virtual crosshair for object centering and field size drift measurements, but of course, do not put an actual crosshair into the field. A star may be placed into one triangle and when the star gets to the opposite triangle, it is proof that the star went through the center of the field of view.
Concerns have been raised about the potential distraction of the cutouts
when observing the moon, Sun, or other daytime scenes. They will not be
noticeable for deep sky or planetary viewing. For these customers, we
will provide eyepieces that have been modified with black paint covering
the triangle cutouts, effectively removing them from view. However, Thomas
Baader, President of Baader Planetarium strongly urges that customers
carefully consider the long-term historical value of these optics before
ordering them with the triangles eliminated, as the alteration cannot
be undone. In an open letter to Astro-Physics customers dated July 24,
2008, he writes:
We have chosen to leave the decision up to you, the ultimate user. Astro-Physics is offering two different versions of the eyepieces as described below. Please note each version is available with or without the Abbe Barlow.
Shipment of the modified eyepiece sets will be delayed approximately 4 weeks. Please note that cancellation of the modified eyepiece sets after the units have been modified will result in forfeiture of your entire deposit. Although the modified eyepieces may be returned for warranty repair or exchange, a full refund is not available. If you choose to return the modified eyepieces because you are no longer interested, a 50% restocking fee will be applied.
For all customers who purchase an unaltered Abbe II set from us, Astro-Physics will offer a one-time triangle elimination service (blacken the triangle cutout areas), free of charge, three months after the eyepieces have been sold. Restrictions apply to this service, which include:
When matched with a Carl Zeiss 2x Abbe Barlow lens (optional), eyepiece focal lengths are halved without any redundancy or compromise of sharpness and resolution.
For the ultimate viewing experience, use two sets of these marvelous eyepieces with the Baader Mark V Binocular Viewer! The incredible contrast and sharpness of these oculars combined with the comfort and virtual three dimensional effect of using both eyes will give views of planetary and lunar features that will seem to "pop right out" where you could simply reach out and touch them!
Walnut storage case is a free gift with purchase while supplies last. Each case provides storage for two sets of eyepieces (one set horizontal and the other vertical) and a Carl Zeiss 2x Abbe Barlow. Only one case will be allowed per person. Quantities are limited and will be confirmed upon receipt of shipment. Recipients will be notified when final payment for eyepieces is requested.
Using the Zeiss Abbe II eyepieces with a Carl Zeiss 2x Abbe Barlow lens doubles the effective focal length of the telescope, or conversely, halves the focal length of the eyepieces to 8mm, 5mm, 3mm, and 2mm without any redundancy or compromise of sharpness and resolution.
We would not recommend using the Zeiss Abbe Barlow with the Mark V Binoviewer. If used on the eyepiece side, a Barlow magnifies inherent defects in the binoviewer’s prism. The Zeiss Abbe Barlow also has too short a focal length to be used effectively in front of the binoviewer, even though it could be attached using the T-threads. For binoviewer use,
This barlow features the Baader ClickLock eyepiece clamping system that grips your eyepiece firmly using a 3-point contact that accurately centers each eyepiece. The ClickLock clamp is attached to the Barlow's body using standard T2 threads. The use of T2 threads greatly enhances the versatility of this Barlow in two important ways: It allows direct connection to a camera using a standard T-ring adapter, and it allows the addition of T2 extensions to effectively increase the magnification factor up to 3X, assuming that your telescope has sufficient in-travel to achieve focus. The effective change will vary somewhat with the eyepiece design you are using. We offer the following three T2 extensions (see our pricelist):
products from Baader Planetarium
Back to top
Copyright © 2008, Astro-Physics, Inc.
- All Rights Reserved
This page was last modified: December 12, 2016
11250 Forest Hills Road, Machesney Park, IL 61115, U.S.A.
Phone: 815-282-1513 Fax: 815-282-9847