Removing Electronic Assembly From The Enclosure

Step 1

Remove 4 socket head screws from the top cover.

Step 2

Remove 4 screws from front panel and lift cover off.

Step 3

Remove 2 Screws from the left cable connector.

Step 4

Repeat on right side

Step 5

Remove 3 screws from the rear heat sink

Step 6

Lift the assembly and connectors clear from the enclosure.

Step 7

To remove the enclosure from the mount, remove the 5 flat-head screws on the bottom of the enclosure. Re-assemble the electronics into the enclosure for shipping.

Back to Technical Support Index

Copyright © 2003, Astro-Physics, Inc. - All Rights Reserved
This page was last modified: April 28, 2004

Astro-Physics, Inc.
11250 Forest Hills Road, Rockford, IL 61115, U.S.A.
Phone: 815-282-1513 Fax: 815-282-984