ADDENDEM TO MANUAL:
GTO KEYPAD CONTROLLER, V 3.0X

Please note the following changes to the manual dated September 10, 2001, which was based on version 3.06.

Corrections

p. 47, #3, last sentence should read:

“Press RA/DEC/REV to return to the Objects Menu.

Changes to Manual Due to Keypad Version Updates

From v3.07 to v3.09

Display Time/LST

p. 29, add:

The current selected location will appear in the lower right corner. For example LOC=1 indicates that location 1 is currently selected.

TIME: 17:40:12
DATE:07:06:1998
GMT:  22:40:29
LST:  11:42     LOC:1







Custom RA and DEC Coordinates

p.27 step 4, substitute:

4.  When the slew is complete, you will return to the Objects Menu. If you go back to the Custom RA/Dec Entry screen, note that the number that displays WILL NOT be the number that you just entered. Rather, it will display the coordinates of the last position you were at when you checked the current position (when you are in Objects Menu pressing the NEXT> button will display the current position).  Please refer to the section that discusses RA Position Memory for an explanation of that feature.

Load

p. 36, add:

If you accidentally press 4=Load, a confirmation message will appear. Press Menu=Exit to escape.

Home

Back to top

Copyright © 2001, Astro-Physics, Inc. - All Rights Reserved
This page was last modified: October 29, 2001

Astro-Physics, Inc.
11250 Forest Hills Road, Rockford, IL  61115, U.S.A.
Phone: 815-282-1513   Fax: 815-282-9847