Limit Switch System for 3600GTO, requires GTOCP4 (36LSSKIT or 36LSSKIT-A)

Optional switches can be installed to control operation past the meridian and for homing. The Limit/Homing Switch System can be used as a simple electronic switch or can be used in conjunction with software to establish limits. All 3600GTO mounts were drilled and tapped to accept this option, which can be added as an upgrade later and installed by the customer.

There are two versions of the kit due to slight mechanical differences in production runs. Be prepared to tell us your serial number when you make your purchase. 

36LSSKIT - For mount with serial #s 36003 to 36030

36LSSKIT-A - for mounts with serial #s 36031 and higher

Included with 36LSSKIT and 36LSSKIT-A

• RA & Dec Limit / Home Switch Assemblies
• Limit Switch Cable Port Cover Plate
• Home plates with actuator cam
• Limit / Hard Stop Plates with actuator cam
• All fasteners and connectors

Also required

You must purchase the 30" Cable to Connect Limit Switch Connector on 3600GTO Cable Port Plate to the GTOCP4 (CAB36LS4). 

If you do not have the GTOCP4 Control Box, please refer to the GTOCP4 Upgrade and Installation Guide.