2.7" Prime Focus Field Flattener for 180 f/9 StarFire EDT (67PF79)

Brand :

Discontinued: No longer available.

SKU:
67PF79
Availability:
Please refer to the information below for historical information and recommendations.

The 67PF79 field flattener is out of stock and no longer available. Note that this item was also sold as 67PF69 and 67PF679. 

The following information is provided for your reference: 

Our 2.7" Field Flattener can be coupled to a variety of different cameras for truly superb photographs or images with your 180 f/9 StarFire EDT.

The back focus spacing for these flatteners (as measured from the rear flange) is 3.4" +/- 1/10" (86.4 mm +/- 2.5 mm).

The bayonet male thread size at the rear is 3.725" x 24.

Use the bayonet locking ring to secure your camera into position after you have framed your image. This allows you to rotate the camera to achieve your desired composition.

Applications

35 mm SLR or DSLR Camera - use 67RT adapters (specify the t-ring that you need) to interface with the field flattener for optimum results in 35 mm film formats. For full frame Canon and Nikon DSLR's, we also offer the Large 1.875" diameter SLR Adapter with Canon EOS (67RLEOS) and Nikon (67RLNIK) Bayonets.

CCD Camera - Chose the appropriate adapter to space the field flattener properly with your CCD camera. Review the Field Flatteners, TCCs & QUADTCC Imaging Train Options .

67PF79 Includes

  • Two beautifully machined and black anodized covers

Diagrams and Instructions

Custom Adapters

If you need an adapter that is not listed above, we recommend that you contact PreciseParts. Refer to the link for the spacing requirements document above.

Important Note: These flatteners will no longer fit the outer bayonet of the original Pentax 6x7 camera.