Nikon Z Mirrorless Camera Adapter with large diameter stainless steel “Z” lens bayonet. For all 3.5" and 4" most Field Flatteners and TCC Telecompressor Correctors. (ADANIK-Z)
- SKU:
- ADANIK-Z
In March 2024, we introduced adapters for popular mirrorless Nikon Z and Canon EOS RF cameras to be used with our 3.5" and 4" Field Flatteners and Telecompressor Correctors (TCC) listed below.
This Camera Adapter for Nikon Z mirrorless cameras with its large inside diameter bayonet minimizes vignetting on full-frame sensors by eliminating the restrictive 1.5" (38 mm) diameter standard T-thread interface.
The adapter body is precision-machined aluminum and black-anodized. The bayonet is machined stainless steel, and both the body and the bayonet are baffled and painted flat-black on the inside.
The ADANIK-Z will place the camera sensor at the perfect 80.8mm distance from the rear flange of the recommended back-focus spacer of the field flattener or TCC. Refer to the DSLR & Mirrorless Camera System diagrams below.
Designed for:
- 110TCC and 110FF
- 13035FF-2, 13035FF-3, 13035TCC-3 and 13035TCC-2
- QUADTCC-155 and QUADTCC (all versions)
- 14035FF and 180F7FF
- Legacy field flatteners: 160FF, 175FF
- Legacy telecompressor correctors: 155TCC, 160TCC, 175TCC
Specifications
- Net spacing distance: 2.55" (64.8 mm)
- Camera adapter: Nikon Z camera
- Female threads: 3.27 x 16tpi to use with the back-focus spacer specified for your field flattener or TCC.
Please note: this adapter can NOT be used with Nikon “F” camera bodies.
Diagrams and Instructions
Refer to the following diagrams for additional information regarding spacing.
Current recommendations:
- 110GTX DSLR and Mirrorless Camera System Diagram
- 130GTX DSLR and Mirrorless Camera System Diagram
- 175 & 160 CCD Field Flattener Spacing Requirements, includes legacy adapters, consider ADANIK-Z instead
- 0.76x 155TCC, 160TCC & 175TCC Telecompressor Corrector Spacing Requirements, includes legacy adapters, consider ADANIK-Z instead
- 0.72x QUADTCC (all versions) Telecompressor Corrector Spacing Requirements, includes legacy adapters, consider ADANIK-Z instead
Custom Spacers & Adapters
If you need a spacer or adapter for a configuration that is not described above, we recommend that you contact PreciseParts.
Astro-Physics 80.8mm Back-focus Spacing Distance
For more information regarding the concept for the 80.8mm back-focus spacing distance, refer to this webpage: Spacers & Extensions
